Whitebirk Linear Pendleton 800mm Double Bowl Fireclay Sink

Whitebirk Linear Pendleton: double bowl with a lowered central dividing wall, 800 x 500 x 220mm, handmade white fireclay from Whitebirk's Horizon Collection.

Whitebirk Linear Pendleton 800mm Double Bowl Fireclay Sink

The Linear Pendleton keeps the Pendleton's triangular edge and two-bowl layout, with over 46 litres of combined capacity, and adds a front of clean horizontal lines. It is 800mm wide with a lowered central dividing wall.

At a glance

Size (W x D x H)	800 x 500 x 220mm
Internal bowl (L x W x depth)	approx. 355 x 440 x 175mm each
Weight	59kg
Bowls	Double Bowl
Fitting	Apron front
Base unit	800mm
Waste	2 x 3.5"
Overflow	Two round overflows
Grid	2 x 420 x 335mm
Made in	Blackburn, Lancashire

Will it fit?

The Linear Pendleton measures 800 x 500 x 220mm (width x depth x height) and weighs about 59kg. Every Whitebirk sink is handmade and kiln-fired, so sizes can vary by up to 2% either way. Have your fitter measure the actual sink before cutting worktops or cabinets. As an apron-front sink it suits an 800mm base unit, and at this weight the cabinet must be reinforced or the sink supported on a frame.

What you get

• Whitebirk Linear Pendleton sink, handmade in white gloss fireclay
• Double bowl with a lowered central dividing wall
• Linear (horizontal lines) front
• Two round overflows
• 2 x central 3.5" waste outlets, suitable for a basket strainer or a waste disposal unit
• Strainers, grids and plumbing kit are sold separately

What you also need

• 2 x 3.5 inch basket strainers, one per bowl. Choose the standard strainer in seven finishes or the premium lever strainer in four. The pack of 2 covers both bowls
• Whitebirk custom-fit grid set (x2) (420 x 335mm, one per bowl) in stainless steel, black, white or a RAL colour, to protect the glaze
• McAlpine SSK2 double bowl space saver plumbing kit for the trap and pipework

The matching strainer, grid and plumbing kit are shown under You May Also Need below.

Specification

Collection	Horizon Collection
Bowls	Double bowl with a lowered central dividing wall
Dimensions (W x D x H)	800 x 500 x 220mm
Internal bowl (L x W x depth)	approx. 355 x 440 x 175mm each
Weight	59kg
Front	Linear (horizontal lines)
Overflow	Two round overflows
Waste outlets	2 x central 3.5"
Fitting	Apron front
Material	Handmade fireclay with antibacterial glaze
Colour	White gloss
Made in	Blackburn, Lancashire, England

Fluted, reeded or linear: what is the difference?

A fluted front has rounded channels cut into the face. A reeded front is the opposite, with raised rounded beads. A linear front, on Whitebirk's Horizon Collection, uses fine horizontal lines for a flatter, more architectural look. All three are moulded into the fireclay and glazed with the rest of the sink.

Caring for your sink

Clean with warm water, a mild washing-up liquid and a soft cloth, then rinse and wipe dry. Avoid abrasive pads, steel wool and harsh chemicals, and don't put very hot pans straight into the bowl. Whitebirk recommend Astonish Oven & Cookware cleaner for marks left by metal pans.

Guarantee

Every Whitebirk fireclay sink comes with a lifetime warranty from Whitebirk Sink Company. Ask us for the full terms.

Frequently asked questions

How big is the bowl inside?

Each bowl measures approx. 355 x 440 x 175mm inside (length x width x depth). These are approximate figures, as every Whitebirk sink is handmade.

What size base unit does the Linear Pendleton need?

At 800mm wide, the Linear Pendleton suits an 800mm base unit. Handmade fireclay can vary by up to 2%, so your fitter should measure the sink itself before cutting the cabinet or worktop.

How heavy is the Linear Pendleton?

About 59kg. At this weight the base unit needs reinforcing, or the sink should sit on a support frame. Whitebirk recommend professional installation.

Which waste do I need?

The Linear Pendleton has 2 x 3.5 inch outlets, so it takes two 3.5 inch basket strainers, standard or premium lever, or a waste disposal unit. The strainer comes with an overflow kit for the sink's overflow.

Is there a grid to protect the bowl?

Yes. Whitebirk make a custom-fit grid for the Linear Pendleton: two grids, one per bowl, at 420 x 335mm, in stainless steel, black, white or a RAL colour.

Can I undermount or inset it instead?

Yes. Whitebirk say any of their kitchen sinks can be inset or undermounted with a support cradle underneath. The Understone Collection is designed specifically for inset and undermount fitting.

Who makes Whitebirk sinks?

Whitebirk Sink Company, a division of Darwen Terracotta Limited. Every sink is handmade and kiln-fired at their factory in Blackburn, Lancashire, and carries a lifetime warranty.

About Whitebirk

Fireclay sink making began in Whitebirk, Lancashire in the late 1800s. Whitebirk Sink Company still makes every sink by hand at its Blackburn factory, and names each one after a Lancashire village, valley or landmark. The company describes itself as the last British-owned manufacturer of traditional fireclay sinks.

Why buy from British Bathroom Company?

We have supplied bathrooms and kitchens since 1998 and sell genuine Whitebirk sinks and accessories. Not sure which strainer, grid or plumbing kit goes with your sink? Ask us before you order and we will check it for you.

DELIVERY

• We aim to deliver all orders within 3-7 working days, dependant on the size of your order or item(s)

• Express delivery is available on some items, feel free to contact ourselves to check if your desired product is available for express delivery

• Small parcels will be delivered via DX and tracking is provided once dispatched

• Large items are delivered via Stop Start or Palletways, details of delivery are provided via email and tracking is also available. Please note most large deliveries are KERB SIDE ONLY although some companies will aim to get the goods as close to the door as possible.