Welcome to our new website!

Bristan Thermostatic Cartridge cart 5

Bristan
SKU
06732
£139.99
    • 3-5 Working Days on Small Goods*
    • 5-7 Working Days on Large Goods*
    • Express Delivery Options Available
    • Despatch and Tracking information provided via Email and Text
    • Large Item orders will be contacted for a delivery date
    • Delivery charges may vary depending on other items added to your basket and your postcode
    *this is a guideline but we do aim to get deliveries out as quick as possible
    • Returns will not be accepted if the item has been used or installed
    • Items must be returned in all original packaging
    • We advise to check your goods for damages within the first 48 hours
    • If your goods arrive damaged please send images to sales@bradfordbathroomcompany.com quoting your order number
    • Returns Policy in full

Bristan Thermostatic Cartridge (cart 5) 06732 COMPL

 

Suitable for: Osborne Art Deco, Omega, Sigma, Prism, Pisa, Orta

 

Please be advised this product is only available to pre-order as it is currently on a 8-10 week lead time

 

Guide:

 

This cartridge replaces the CART5 and also is used in the Tivolli & Tivolli II shower

 

Instructions for the Bristan Thermostatic Cartridge: see diagram Below.

 

PLEASE READ: If the cartridge is difficult to remove!

 

Do NOT try to unscrew the cartridge

 

remove the front plate with the two Allen screws the cartridge should just pull out.

 

If not remove the plug from the body (Opposite side from the hose) you should then be able to get a screwdriver in underneath the cartridge and lever it forward and out.

 

You can also remove the two inlet elbows this will allow you to get two screwdrivers in to the rear of the cartridge to lever it forward.

 

Finally if it is a surface mounted valve and you can't get to the plug or inlet elbows.

 

Remove the front plate with the two Alan screws, then reassemble the knobs loosely you should then be able to fit two screwdrivers in behind the knobs and lever them forward against the valve body

 

Cartridge Removal

First remove the temperature control handle. See relevant detailed procedure below.

 

Osborne Art Deco

 

Unscrew the indice assembly (17), unscrew the retaining screw (19) and pull the handle (9) off the spindle.

 

Omega

 

Unscrew the indice cap (15), unscrew the retaining screw (19) remove the ring (14) and pull the handle (9) off the spindle. Sigma Remove the plug (13), unscrew the retaining grub screw (12) and pull the handle(9) off the spindle.

 

Prism

 

Unscrew and remove the handle spindle (11), unscrew the retaining grub screw(10) and pull the handle (9) off the spindle.

 

Pisa, Orta

 

Remove the indice (16), unscrew the retaining screw (19) and pull the handle (9) off the spindle. To remove flow control-handle (8), remove circlip (18) and pull off. Remove the two screws and washers (7), the retaining ring (6) and the slip ring(5). To remove cartridge (3) pull forward from shower body (1).

 

Fitting replacement Cartridge

 

Ensure that the ceramic disc valve (2) (flow adjustment) is in the off / closed position. Grease the seals with silicon grease and carefully refit the cartridge into the body. Refit the slip ring (5) and the retaining ring (6) using screws and washers (7). NB: Please note that the retaining ring (6) should be positioned so that the cartridge has the required 90 degrees of anti-clockwise movement to its open position. If the slots in the ring do not line up with the holes in the body, remove the cartridge and turn it by the required amount and refit. Refit the flow control handle (8) in the desired 'off' position and fit circlip (18). 5) Before refitting temperature control handle reset the Maximum Temperature following the 'Thermotech cartridge commissioning procedure in section 3.

 

Setting maximum temperature

 

Turn on the water supplies and fully open the flow control, let the water run long enough to ensure that the hot water supply is at its maximum temperature. First operate the temperature spindle (4) to the full extremes of its rotation using the temperature handle if necessary. To set cartridge to desired temperature turn the spindle anti-clockwise to increase the temperature and clockwise to reduce it. Refit the temperature control handle by reversing the procedures in section 1 ensuring the stop pin in the handle is at the maximum temperature position.

More Information
Brand Bristan
Write Your Own Review
You're reviewing:Bristan Thermostatic Cartridge cart 5